consolidation of b4c-tab2 eutectic composites by spark plasma sintering
Clicks: 236
ID: 198633
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
236 views
26 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #24 of 33 articles by views in offshore
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The in situ synthesis/consolidation of B4C-TaB2 eutectic composites by spark plasma sintering (SPS) is reported. The microstructure–property relations were determined for composites with the B4C-TaB2 eutectic composition as functions of TaB2 content, and TaB2-TaB2 interlamellar spacing. A clear maximum in fracture toughness was identified (∼4.5 MPa m1/2) for eutectic composites with interlamellar spacing between 0.9 and 1.1 μm. The composites with the hypereutectic composition of 40 mol.% TaB2 obtained by SPS exhibited lower Vickers hardness (25–26 GPa) but higher indentation fracture toughness (up to 4.9 MPa m1/2) than eutectic composites with 30–35 mol.% of TaB2.
| Reference Key |
demirskyi2015journalconsolidation
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Dmytro Demirskyi |
| Journal | offshore |
| Year | 2015 |
| DOI |
10.1016/j.jascer.2015.08.001
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.