effects of polypropylene fibre on the compressive and splitting tensile strength of concrete

Clicks: 309
ID: 193224
2018
Free PDF
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #10 of 16 articles by views in international migration

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Concrete is a versatile construction material comprising of cement, aggregates, water and occasionally admixture. It is very good in compression and weak in tension. To complement for the deficiency in the tensile zone; cracks, reinforcements (steel, fibre, etc.) have been found suitable. A good example of fibre is polypropylene. A concrete grade (M20) was batched and synthetic fibre (polypropylene) was used.  Two categories of concrete specimens; with and without propylene fibre. The fibre was introduced in varying percentages (0.2%, 0.4%, and 0.6%) by weight of concrete. The compressive strength of concrete containing 0.4% polypropylene fibre at 28 days has the highest value of 32.22N/mm2 as compared to 30.22N/mm2, 30.49N/mm2 and 30.39N/mm2 for 0%, 0.2%, and 0.6% respectively. The splitting tensile strength at 7 days increases from 6.176 N/mm2 to 8.386 N/mm2 as the percentage of fibre increases from 0% to 0.4%.
Reference Key
rasheed2018journaleffects Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors
Journal international migration
Year 2018
DOI
DOI not found
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.