severe plastic deformation by equal channel angular pressing: product quality and operational details
Clicks: 199
ID: 192177
2011
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
199 views
35 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #71 of 96 articles by views in Majalah Ilmiah Teknologi Elektro
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
As a technique, Equal Channel Angular Pressing (ECAP) is simple and inexpensive. However, if die manufacture and operational details are not carefully planned and implemented, difficulties arise, which can interfere with the product characteristics and the pressing operation itself. The present paper offers guidelines on die design and manufacture, emphasizing geometry, material and heat treatment. Further, operational parameters such as lubrication, pressing temperature, deformation routes, die closure procedure and the influence of channel cross section on maximum acceptable load are described. Additionally, the effects of those variables on the product characteristics (deformation level and homogeneity) and integrity, plus process control and safety, are discussed.
| Reference Key |
filho2011materialssevere
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Anibal de Andrade Mendes Filho;Erika Fernanda Prados;Gustavo Trindade Valio;José Benaque Rubert;Vitor Luiz Sordi;Maurizio Ferrante |
| Journal | Majalah Ilmiah Teknologi Elektro |
| Year | 2011 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.