the visual method in quality assessment of single-lap adhesive joints
Clicks: 249
ID: 190447
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
249 views
44 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #43 of 71 articles by views in electrochemistry communications
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
This article presents selected criteria for the quality assessment of single-lap adhesive joints formed on 0.66±0.04 thick hot dip zinc coated sheets with the hot dip zinc coating thickness equal to 18 µm. Three types of epoxy adhesives and three variants of the mass of adhesives were tested (1 g, 2 g and 3 g). The work intended to assess the capacity of the visual method with regard to evaluating joint quality, allowing for the presence and the size of spew fillet, joint dimensions and the effect of spew fillet on adhesive joint strength. The strength of analysed adhesive joints was determined in destructive tests.
| Reference Key |
rudawska2016advancesthe
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Anna Rudawska;Dana Stančeková;Józef Brzęczek |
| Journal | electrochemistry communications |
| Year | 2016 |
| DOI |
10.12913/22998624/64066
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.