effect of modification with various epoxide compounds on mechanical, thermal, and coating properties of epoxy resin
Clicks: 152
ID: 187586
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
152 views
19 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #40 of 80 articles by views in 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Epoxy resin (ER) was modified with four different epoxide compounds, 4,5-epoxy-4-methyl-pentane-2-on (EMP), 3-phenyl-1,2-epoxypropane (PhEP), 1-chloro-2,3-epoxy-5-(chloromethyl)-5-hexene (CEH), and a fatty acid glycidyl ester (FAGE), to improve its chemical and physical properties. The effects of the addition and amount of these modifiers on mechanical, thermal, and coating properties were investigated. Atomic force microscopy was used to observe the changes obtained with the modification. The influence of the modifying agents on the curing process was monitored through FTIR spectroscopy. The curing degrees of ER and modified ERs (M-ERs) were found to be over 91%. The results showed that tensile strength of ER improved till 30% (wt.) with addition of the modifier content. Modification with EMP and PhEP remarkably enhanced the thermal stability of ER to be highly resistant to the corrosive media.
| Reference Key |
cerit2016internationaleffect
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Alaaddin Cerit;Mustafa Esen Marti;Ulku Soydal;Suheyla Kocaman;Gulnare Ahmetli |
| Journal | 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7 |
| Year | 2016 |
| DOI |
10.1155/2016/4968365
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.