melting features and viscosity of sio2-cao-mgo-al2o3-feo nickel slag in laterite metallurgy
Clicks: 313
ID: 185670
2013
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
313 views
49 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #3 of 25 articles by views in computational statistics
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Physic-chemical properties of slag at high temperature were very important for the production of ferronickel alloy by pyrometallurgical process. It determines the operation efficiency, metal recovery ratio, energy consumption and the distribution of elements (like S and P) between the slag and metal. In the present work, the effect of slag basicity on melting features and viscosity of the slag was investigated. The basicity of the SiO2-CaO-MgO-Al2O3-FeO quinary slag system varied from 0.76 to 0.99. The results showed that: 1) all the slag samples began to soften at the same temperature; 2) the softening temperature, melting temperature and flowing temperature decreased with the increase of basicity from 0.76 to 0.92, after that, the temperatures would increase sharply. 3) the inflection point temperature of viscosity-temperature curve became larger and larger with the increase of basicity within 0.76 ~ 0.99.
| Reference Key |
c.2013journalmelting
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Pan C.;Lv X.;Bai C.;Liu X.;Li D. |
| Journal | computational statistics |
| Year | 2013 |
| DOI |
10.2298/JMMB120112034P
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.