effect of strain rate on compressive behaviour of silicone rubber
Clicks: 225
ID: 184554
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
225 views
27 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #12 of 625 articles by views in utilitas mathematica
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 625 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The purpose of this study is to evaluate the effect of strain rate on compressive behaviour of silicone rubber. The silicone rubber which was used as biomimetic material was prepared as a specimen. The shape of specimen was cubic and each side length was 10 mm. In this study, a dynamic compressive test was performed using a drop-weight testing machine at the strain rate of approximately 101 s-1, which can be detect the compressive stress for a long time without any disturbance. For comparison, a quasi-static compressive test was performed using the universal testing machine at the strain rate of 10-4 to 10-1 s-1. In the deformation process of the silicone rubber, the flow stress did not increase at the early stage of deformation. When the strain reached 0.6, the flow stress was increased with increasing strain. This deformation process was considered to be due to rubber elasticity. It was confirmed that the silicone rubber showed an increase of the flow stress with increasing strain rate, which showed general behaviour of soft materials such as rubber. In the silicone rubber, the flow stress with respect to the strain rate could be simply expressed with the Cowper-Symonds constitutive equation.
| Reference Key |
kohei2018epjeffect
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Tateyama Kohei;Yamada Hiroyuki;Ogasawara Nagahisa |
| Journal | utilitas mathematica |
| Year | 2018 |
| DOI |
10.1051/epjconf/201818302044
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.