Optimization of hollow-fiber liquid phase microextraction for polychlorinated biphenyls in human breast milk.

Clicks: 241
ID: 181757
2020
Article Quality & Performance Metrics
Overall Quality Improving Quality
0.0 /100
Combines engagement data with AI-assessed academic quality
AI Quality Assessment
Not analyzed
Abstract
A reliable and sensitive analytical approach has been optimized for the extraction of seven polychlorinated biphenyls (PCBs) from human breast milk. Hollow fiber liquid phase microextraction (HF-LPME) was applied for the first time for the extraction and pre-concentration of the analytes. Analytes were separated by gas chromatography with electron capture detector (GC-μECD) for the sensitive detection and mass spectrometry for the unequivocal identification. A rotable central composite design (RCCD) was performed for the multivariate optimization of the method. The best results were obtained at 40 °C during 30 min and 600 rpm of stirring speed using a hollow fiber length of 5 cm and toluene as an extractant phase and salt addition was not required. The detection limits were in the range 7-14 ng L for PCBs. The coefficients of determination of the calibration curves indicated good linearity (R> 0.96) and the enrichment factors ranged from 74 to 143. This type of study is of great importance due to the deleterious effect that the presence of contaminants can produce in infants health related to the immature character of the defense system. Moreover, exclusive breastfeeding is recommended by neonatologists up to six months of life and as complementary food during the first two years.
Reference Key
villegaslvarez2020optimizationjournal Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Villegas-Álvarez, M C;Callejón-Leblic, B;Rodríguez-Moro, G;Gómez-Ariza, J L;Arias-Borrego, A;García-Barrera, T;
Journal journal of chromatography a
Year 2020
DOI
S0021-9673(20)30658-0
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.