efektivitas injeksi larutan kapur untuk menurunkan plastisitas tanah lempung sebagai upaya mengatasi kerusakan jalan raya

Clicks: 115
ID: 175672
2012
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Popular

Ranked #9 of 12 articles by views in pertanika journal of science and technology

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Highway built on high plasticity clay will be easily damaged by groundshrinkage flower essence. Stabilization of clayby mixing lime is a repairement method that has been proven quite effective. However, this method is difficult to be applied in existing  road because demolition must be done. Stabilization of clay using lime solution injection is the method proposed toovercome the  problems of expansive clay under the existing highway, therefore demolition is not required. This study was conducted to obtain  effective parameters influencing the distance lime solution injection sites and time required for complete stabilization process. This research was conductedin labotarorium by injection experiments. Test results shows indications of soil plasticity decrease, especially  the value of plasticity index (PI) and liquid limit (LL). PI decreases from 24.74% to 19.5% and LL decrease from 52.32% to 45%. Based on data analysis it appears that the time required for complete lime solution injection (effective time) has not been obtained in  this test. Based on test data, until the day 28 value of soil plasticity index is still low. In this study obtained effective distance influencing the injectionsolution of lime is 100 cm. The distance is still need to be enlarged by increasing the high pressure.
Reference Key
sumiyanto2012dinamikaefektivitas Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Sumiyanto Sumiyanto;Arwan Apriyono
Journal pertanika journal of science and technology
Year 2012
DOI
DOI not found
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.