the investigation reaction kinetic for polyurethanes based on different types of diisocyanate and castor oil
Clicks: 204
ID: 171285
2012
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
204 views
23 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #37 of 60 articles by views in lecture notes in information systems and organisation
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The formation of polyurethanes based on vegetable oils is very complex and thus for industrial production of this materials it is important to determine the optimal temperature for polymerisation and finally to obtain materials with the proper mechanical properties. The goal of this work was to assess the kinetic of catalysed and noncatalysed reactions for polyurethanes based on castor oil as the polyol component and different types of diisocyanates. Due to the presences of hydroxyl groups on ricinoleic acid, castor oil is suitable for polyurethane preparation. The differential scanning calorimetry has been employed to study the polyurethane formation reaction using Ozawa isoconversion method. It was estimated that the catalyst addition decreases the activation energy. The highest reduction of activation energy was observed for the reactive systems with hexamethylene diisocyanate. Validity of obtained kinetic model was examined by FTIR spectroscopy following the apsorption of reactive groups. Obtained results of mechanical characteristics of the polyuretahane networks (with different NCO/OH ratio) confirmed that applied method could be used for prediction of optimal reaction condition in polyurethane networks synthesis.
| Reference Key |
s.2012hemijskathe
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Ristić Ivan S.;Budinski-Simendić Jaroslava;Bjelović Zoran;Jovičić Mirjana;Pavličević Jelena;Pilić Branka;Cakić Suzana |
| Journal | lecture notes in information systems and organisation |
| Year | 2012 |
| DOI |
10.2298/HEMIND111216014B
|
| URL | |
| Keywords | Keywords not found |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.