optimization of a sensor for a tian–calvet calorimeter with ltcc-based sensor discs
Clicks: 124
ID: 169341
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
124 views
15 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #15 of 22 articles by views in arabic literature in the post-classical period
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
In this work, it is shown how a finite element method
(FEM) model of a Tian–Calvet calorimeter is used to find improvements
in the sensor design to increase the sensitivity of the calorimeter. By
changing the layout of the basic part of the sensor, which is a low
temperature co-fired ceramics (LTCC) based sensor disc, an improvement by a
factor of 3 was achieved. The model was validated and the sensors were
calibrated with a set of measurements that were later used to determine the
melting enthalpies and melting temperatures of indium and tin samples.
Melting temperatures showed a maximum deviation of 0.2 K while the enthalpy
was measured with a precision better than 1 % for most samples. The
values for tin deviate by less than 2 % from literature data.
| Reference Key |
schubert2016journaloptimization
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;F. Schubert;M. Gollner;J. Kita;F. Linseis;R. Moos |
| Journal | arabic literature in the post-classical period |
| Year | 2016 |
| DOI |
10.5194/jsss-5-381-2016
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.