pengembangan perekat likuid dan papan partikel dari limbah tandan kosong sawit

Clicks: 314
ID: 167858
2013
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #3 of 14 articles by views in sequência: estudos juridicos e politicos

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Oil palm empty fruit bunches (EFB) is one of lignocellulosic natural resource, which is highly potential as adhesive and particleboard raw materials. The purpose of the study was determine wood liquid qualities, and to evaluate the effect of adhesive contents, wood liquid extension levels on melamine formaldehyde (MF) resin, and resorcinol formaldehyde (RF) fortification levels on wood liquid to particleboard quality. The results showed that the EFB wood liquid is considered as phenolic resin group, liquid form and free of dirt, reddish brown color, pH 11, 34 cps viscosity, solids content of 34.47%, and gelatine time >60 minutes. Some characteristics of wood liquid adhesives meet SNI 06-4567-1998, namely the form, appearance, pH, and gelatine time. The physical and mechanical properties of particle board for all treatments were 0.640.93 g/cm3 density, moisture content 612%, thickness swelling 13292%, water absorption 39239%, modulus of rupture (MOR) 16199 kg/cm2, modulus of elasticity (MOE) 232119810 kg/cm2, internal bonding 0.167.19 kg, and screw holding power 1662 kg. Some physical and mechanical properties of particle board meet the standard of JIS A 5908-2003. Particleboard using MF resin without wood liquid extension (adhesive content of 20%) was the best quality particleboard. Wood liquid for particleboard recommended using wood liquid fortified with 5% MF resin (adhesive content of 15%) and MF resin with 15% wood liquid extensions (adhesive content of 20%) produced good quality particleboard.
Reference Key
ruhendi2013jurnalpengembangan Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Surdiding Ruhendi;Tito Sucipto
Journal sequência: estudos juridicos e politicos
Year 2013
DOI
DOI not found
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.