sol-gel sio2-cao-p2o5 biofilm with surface engineered for medical application
Clicks: 277
ID: 166508
2007
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
277 views
53 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #33 of 96 articles by views in Majalah Ilmiah Teknologi Elektro
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Sol-gel film in the SiO2-CaO-P2O5 system was prepared from TEOS, TEP, alcohol and hydrated calcium nitrate in an acidic medium. The coatings were deposited on stainless steel using the dip-coating technique. After deposition, the composite was submitted to heat treatment, at different temperatures and exposure times to investigate the influence of such parameters on the surface morphology of the composite. The coated surfaces were characterized by AFM, SEM and FTIR. The present study showed that the formation of different textures (an important parameter in implant fixation) could be controlled by temperature and time of heat treatment.
| Reference Key |
federman2007materialssol-gel
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Sonia Regina Federman;Vilma Conceição Costa;Daniela Cordeiro Leite Vasconcelos;Wander Luiz Vasconcelos |
| Journal | Majalah Ilmiah Teknologi Elektro |
| Year | 2007 |
| DOI |
10.1590/S1516-14392007000200014
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.