adhesion performance of electrodeposited ni films with different treating methods

Clicks: 209
ID: 166322
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #47 of 58 articles by views in die pharmazie

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
The adhesion strength between thin films has a significant effect on performance of micro-devices. It is introduced that the effects of three pre-treatment methods: acid, pulse reverse current and anodic current, on the adhesion performance of electrodeposited Ni films on Ni substrate. The adhesion strength, surface and fracture morphology of the Ni films were investigated. The dense oxide films on the Ni substrate were removed effectively by using the anodic dissolution current method in the acidic chloride solutions. Meanwhile, the Ni films treated with specific treatment conditions produced different roughness, which was responsible for the improved adhesion strength. The adhesion strength of the Ni films increased up to 629.8 MPa when substrates were treated with anodic current density of 30 mA/cm2 for 10 min, which is nearly two times higher than that of films treated by 5 vol % HCl for 10 min. The results indicate that the anodic current treatment method effectively improves the adhesion strength of Ni films.
Reference Key
liu2018coatingsadhesion Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors
Journal die pharmazie
Year 2018
DOI
10.3390/coatings8060201
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.