improve the properties of p-i-n α-si:h thin-film solar cells using the diluted hydrochloric acid-etched gzo thin films

Clicks: 138
ID: 153619
2013
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #309 of 443 articles by views in reproductive biology and endocrinology

Most read Least read

Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 443 in total.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Gallium-doped zinc oxide (GZO) thin films were deposited on glass, and the process parameters are RF power of 50 W and working pressure of 5 mTorr, and the substrate temperature was changed from room temperature to 300°C. At first, the thickness was around 300 nm by controlling the deposition time. The effects of substrate temperature on the crystallinity, lattice constant (c), carrier mobility, carrier concentration, resistivity, and optical transmission rate of the GZO thin films were studied. The 200°C-deposited GZO thin films had the best crystallinity, the larger carrier concentration and carrier mobility, and the lowest resistivity. For that, the thickness of the GZO thin films was extended to around 1000 nm. Hydrochloric (HCl) acid solutions with different concentrations (0.1%, 0.2%, and 0.5%) were used to etch the surfaces of the GZO thin films, which were then used as the substrate electrodes to fabricate the p-i-n α-Si:H thin-film solar cells. The haze ratio of the GZO thin films increased with increasing HCl concentration, and that would effectively enhance light trapping inside the absorber material of solar cells and then improve the efficiency of the fabricated thin-film solar cells.
Reference Key
wang2013journalimprove Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Fang-Hsing Wang;Ming-Yue Fu;Chean-Cheng Su;Cheng-Fu Yang;Hua-Tz Tzeng;Han-Wen Liu;Chung-Yuan Kung
Journal reproductive biology and endocrinology
Year 2013
DOI
10.1155/2013/495752
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.