prediction of high temperature creep deformation and rupture life on hp heat resistant alloy using zc parameter
Clicks: 311
ID: 144684
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
311 views
41 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #9 of 52 articles by views in adsorption science and technology
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Through the study on high temperature creep data of HP heat resistant alloy, a prediction method of high temperature creep deformation based on Zc parameter was proposed. The creep resistance of HP heat resistant alloy was predicted by this method. The results indicate that the predicted data are in good agreement with the HP heat resistant alloy creep experimental data at 1000,980℃ and 930℃. At the same time, the creep rupture life of heat resistant alloy was evaluated by this method, the results show that the predicted principal curves agree well with the experimental data.
| Reference Key |
hui-fang2018journalprediction
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;LI Hui-fang;ZHAO Jie;CHENG Cong-qian;MIN Xiao-hua;CAO Tie-shan;XU Jun |
| Journal | adsorption science and technology |
| Year | 2018 |
| DOI |
10.11868/j.issn.1001-4381.2016.000354
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.