effect of nano-caco3 and talc on property and weathering performance of pp composites
Clicks: 181
ID: 133547
2017
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
181 views
33 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #28 of 80 articles by views in 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Wood plastic composites (WPCs) are increasingly being utilized these days due to their excellent mechanical properties and low maintenance cost. Despite these advantages, poor UV resistance and low impact strength are drawbacks. To overcome these shortcomings, coextrusion technology has recently been applied in the production of WPCs and it has been showing good results. However, further research on the combination of different functional enhancements is still needed. This study, therefore, manufactured polypropylene (PP) composites filled with UV stabilizer and inorganic fillers (i.e., nano-CaCO3 and talc) and then investigated the influence of weathering on the mechanical and morphological properties of the filled composites as a function of filler type and content. UV stabilizer effectively protected the filled composites from UV-induced photodegradation. At 2.5 wt% nano-CaCO3 (NCC), the NCC particles were well dispersed in the PP matrix, thereby improving the mechanical properties of the filled composites. The best results were observed in 2.5 wt% NCC and 10 wt% talc hybrid filled composites. The composites prepared by adding UV stabilizer to the PP matrix together with NCC and talc exhibited high mechanical properties and improved weathering resistance, and, thus, the combination of NCC, talc, and UV stabilizer in the PP matrix is applicable for shell layer to be used in coextruded WPCs.
| Reference Key |
lee2017internationaleffect
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Danbee Lee;Seungkyun Kim;Birm-June Kim;Sang-Jin Chun;Sun-Young Lee;Qinglin Wu |
| Journal | 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7 |
| Year | 2017 |
| DOI |
10.1155/2017/4512378
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.