hot consolidated all-pp composites from textile fabrics composed of isotactic pp filaments with different degrees of orientation

Clicks: 323
ID: 132094
2007
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Star

Ranked #35 of 74 articles by views in introducing the mysql 8 document store

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Self-reinforced polypropylene composites (SRPPC) were hot pressed from textile layers (carded mat, knitted fabrics) at three different temperatures (160, 165 and 170°C) by setting a constant pressure (6 MPa) and constant holding time (2 min). Both textiles consist of two kinds of isotactic polypropylene (iPP) fibers differing in their orientation. In these compositions the highly oriented iPP works as reinforcement and the less oriented one fulfills the role of the matrix after hot consolidation. Two textile assemblies, viz. carded (also needle punched) mats and knitted fabrics were hot pressed; and the properties of the resultant SRPPC plates were investigated under tensile and falling weight impact conditions. The microstructure of the SRPPC was analyzed by light microscopy using polished sections and by SEM using cut surfaces.
Reference Key
noauthor2007expresshot Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;
Journal introducing the mysql 8 document store
Year 2007
DOI
10.3144/expresspolymlett.2007.109
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.