dielectric behaviour of cacu3ti4o12-epoxy composites
Clicks: 284
ID: 131226
2008
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
284 views
47 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #34 of 96 articles by views in Majalah Ilmiah Teknologi Elektro
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The dielectric behavior of composite materials (epoxy resin - barium titanate and epoxy - CCTO) was analysed as a function of ceramic amount. Composites were prepared by mixing the components and pouring them into suitable moulds. In some compositions, the matrix was reduced by tetrahydrofuran (THF) incorporation. Samples containing various amounts of ceramic filler were examined by TG/DTA and scanning electron microscopy analysis. Dielectric measurements were performed from 20 Hz to 1 MHz and 30 to 120 °C. It was demonstrated that the epoxy - CCTO composites possessed higher permittivity than classic epoxy - BaTiO3 composites. However, the low resin permittivity prevailed in the composite dielectric performance.
| Reference Key |
ramajo2008materialsdielectric
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Leandro Alfredo Ramajo;Miguel Angel Ramírez;Paulo Roberto Bueno;María Marta Reboredo;Miriam Susana Castro |
| Journal | Majalah Ilmiah Teknologi Elektro |
| Year | 2008 |
| DOI |
10.1590/S1516-14392008000100016
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.