efeito da utilização de areia no processamento e nas propriedades de cerâmica vermelha effect of the use of sand in the processing and properties of red ceramics
Clicks: 301
ID: 130249
2010
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
301 views
53 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #14 of 111 articles by views in Zootaxa
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Este trabalho teve por objetivo reformular uma típica massa de telhas produzida no município de Campos dos Goytacazes, RJ, variando a quantidade de areia. As matérias-primas, massa argilosa e areia, foram inicialmente submetidas a ensaios de caracterização mineralógica, química e física. Foram preparados corpos de prova por extrusão para queima nas temperaturas de 850, 950 e 1050 ºC. As propriedades avaliadas foram plasticidade, absorção de água, retração linear de queima e tensão de ruptura à flexão. Os resultados indicaram que as propriedades avaliadas melhoraram com a utilização de areia.
This work has as objective to reformulate a typical roofing tile body produced at Campos dos Goytacazes, RJ, Brazil, varying the amount of sand. The raw materials, clayey body and sand, were initially submitted to mineralogical, chemical and physical characterization tests. Specimens were prepared by extrusion to fire at 850, 950 and 1050 ºC. The evaluated properties were: plasticity, water absorption, firing linear shrinkage and flexural rupture strength. The results indicated that the evaluated properties improved with the use of sand.
This work has as objective to reformulate a typical roofing tile body produced at Campos dos Goytacazes, RJ, Brazil, varying the amount of sand. The raw materials, clayey body and sand, were initially submitted to mineralogical, chemical and physical characterization tests. Specimens were prepared by extrusion to fire at 850, 950 and 1050 ºC. The evaluated properties were: plasticity, water absorption, firing linear shrinkage and flexural rupture strength. The results indicated that the evaluated properties improved with the use of sand.
| Reference Key |
queiroz2010cermicaefeito
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;L. F. T. Queiroz;S. N. Monteiro;C. M. F. Vieira |
| Journal | Zootaxa |
| Year | 2010 |
| DOI |
10.1590/S0366-69132010000300011
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.