Experimental investigation on the effects of process parameters of GMAW and transient thermal analysis of AISI321 steel

Clicks: 392
ID: 116845
2013
Free PDF
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Popular

Ranked #7 of 27 articles by views in advances in manufacturing

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Sign in to mint
Abstract
Gas metal arc welding (GMAW) develops an arc by controlling the metal from the wire rod and the input process parameters. The deposited metal forms a weld bead and the mechanical properties depend upon the quality of the weld bead. Proper control of the process parameters which affect the bead geometry, the microstructures of the weldments and the mechanical properties like hardness, is necessary. This experimental study aims at developing mathematical models for bead height (H B), bead width (W B) and bead penetration (P B) and investigating the effects of four process parameters viz: welding voltage, welding speed, wire feed rate and gas flow rate on bead geometry, hardness and microstructure of AISI321 steel with 10 mm thickness. The transient thermal analysis shows temperature and residual stress distributions at different conduction and convection conditions.
Reference Key
kamble2013advancesexperimental Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors A. G. Kamble;R. Venkata Rao;A. G. Kamble;R. Venkata Rao;
Journal advances in manufacturing
Year 2013
DOI
doi:10.1007/s40436-013-0041-2
URL
https://link.springer.com/article/10.1007/s40436-013-0041-2
Keywords
manufacturing control Machines Tools Processes Robotics Mechatronics nanotechnology and microengineering

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.