Fabrication of Bragg gratings in planar PMMA: impact of UV dosage and thermal annealing
Clicks: 358
ID: 110277
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Popular Article
81.9
/100
358 views
221 readers
Trending
AI Quality Assessment
Not analyzed
Readership in this journal
PopularRanked #14 of 81 articles by views in Optics express
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
We report on the fabrication of planar Bragg gratings in polymer substrates and study the impact of the UV dosage and a subsequent thermal annealing on the reflectivity of the gratings and the full width at half maximum bandwidth of the reflected spectra. In addition, the influence of the grating length is investigated, showing that gratings as short as 4 mm continuously exhibit good reflection properties, facilitating miniaturized sensor designs. Moreover, we highlight that the polymer Bragg gratings exhibit a remarkable stable reflected spectrum for over two years. Finally, the experimentally determined spectral characteristics of the Bragg gratings are compared to simulated results revealing excellent agreement.
| Reference Key |
hellmann2016opticsfabrication
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Manuel Rosenberger,M. Girschikofsky,B. Schmauss,R. Hellmann;Manuel Rosenberger;M. Girschikofsky;B. Schmauss;R. Hellmann; |
| Journal | Optics express |
| Year | 2016 |
| DOI |
10.1364/OE.24.022563
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.