A novel betaine type asphalt emulsifier synthesized and investigated by online FTIR spectrophotometric method
Clicks: 427
ID: 106801
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
427 views
45 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #2 of 5 articles by views in chemical industry and chemical engineering quarterly
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
A novel betaine type asphalt emulsifier 3-(N,N,N-dimethyl acetoxy ammonium
chloride)-2-hydroxypropyl laurate was synthesized after three steps by the
reaction of lauric acid, epichlorohydrin, dimethylamine and sodium
chloroacetate. The optimum reaction conditions were obtained for the
synthesis of the first step of 3-chloro-2-hydroxypropyl laurate. The
esterification yield reaches 97.1% at the optimum conditions of reaction
temperature 80ºC, reaction time 6 h, feedstock mole ratio of epichlorohydrin
to lauric acid 1.5, mass ratio of catalyst to lauric acid 2%. The chemical
structure of the product was characterized by FTIR and 1H NMR. The first
synthesis step of 3-chloro-2-hydroxypropyl laurate was monitored by online
FTIR technique. The by-product was detected by the online FTIR analysis.
Based upon the experimental data, a plausible reaction mechanism was proposed
for the reaction. The CMC of the objective product has a lower value of
7.4×10-4 mol/L. The surface tension at CMC is 30.85 mN/m. The emulsifier is a
rapid-set asphalt emulsifier.
| Reference Key |
laishun2015achemical
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Laishun, Shi;Meijie, Sun;Na, Li;Bochen, Zhang; |
| Journal | chemical industry and chemical engineering quarterly |
| Year | 2015 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.