Role of Ag+ in the Bioleaching of Arsenopyrite by Acidithiobacillus ferrooxidans
Clicks: 161
ID: 105073
2020
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
161 views
17 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #58 of 66 articles by views in metals
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Arsenopyrite (FeAsS) is often associated with gold, but pre-treatment is necessary prior to gold leaching, mainly due to the gold encapsulation in the matrix of FeAsS. Bio-oxidation is attractive and promising, largely due to its simplicity, low cost and environmental friendliness. A critical problem that still impedes the large-scale applications of this green technology is its slow leaching kinetics. Some metal ions such as Ag+ have previously been found to expedite the bioleaching process. In this paper, the role of Ag+ in the arsenopyrite bioleaching by Acidithiobacillus ferrooxidans was investigated in detail by bioleaching experiments and a series of analyses including thermodynamics, X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Experimental results suggested that addition of 5 mg/L Ag+ to the leaching system could significantly improve the final As leaching efficiency from 30.4% to 47.8% and shorten the bioleaching period from 19 days to 15 days. Thermodynamic analysis indicates that Ag+ destabilises As2S2, As2S3 and S0 via forming Ag2S, which is confirmed by the XRD analysis on the phase transformation during bioleaching. SEM and XPS analyses further showed that Ag+ removed the passivating film consisting mainly of As2S2, As2S3 and S0 because Ag2S formed on the arsenopyrite surface from the start bioleaching of 36 h. In the presence of Fe3+, Ag2S could easily be dissolved to Ag+ again, likely leading to the establishment of the Ag+/Ag2S cycle. The bacteria utilised the two synergistic cycles of Fe3+/Fe2+ and Ag+/Ag2S to catalyse the bioleaching of arsenopyrite.
| Reference Key |
zhang2020rolemetals
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Zhang, Yan;Li, Qian;Liu, Xiaoliang; |
| Journal | metals |
| Year | 2020 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.