Remarkably high Pb binding capacity of a novel, regenerable bioremediator Papiliotrema laurentii RY1: Functional in both alkaline and neutral environments.

Clicks: 243
ID: 100596
2020
Article Quality & Performance Metrics
Overall Quality Improving Quality
0.0 /100
Combines engagement data with AI-assessed academic quality
AI Quality Assessment
Not analyzed
Abstract
The ability of P. laurentii strain RY1 to remediate lead (Pb) from water was investigated in batch and column studies. The lead removal ability of non-viable biomass, non-viable biomass immobilised on agar-agar (biobeads) and agar-agar at different pH was compared in batch studies. It was found that among the three, biobeads have maximum ability to remove Pb followed by biomass and agar-agar beads. Maximum and almost equal lead removal by biobeads was observed at both neutral and alkaline pH making it a novel and more applicable bioremediator as all other reported bioremediators have a single pH for optimum activity. Studies were performed to determine the optimum conditions for lead removal from aqueous solutions for biobeads. The physical and chemical characterization of the biobeads before and after Pb biosorption was done by using S.E.M. and F.T.I.R. respectively. The adsorption of Pb on biobeads obeyed the Langmuir adsorption isotherm and pseudo first order kinetics. These mean that the Pb binding sites are identical, located on the surface of the adsorbant and the rate of Pb removal from aqueous solution is directly proportional to the number of Pb binding sites on the biobeads. The thermodynamics of the biosorption process is also investigated. The binding capacity of the biobeads in batch study was found to be 52.91mg/gm which is higher in comparison to other reported yeast bioremediators. The used biobeads can be desorbed using 0.1(M) CaCl. The desorbed biobeads can be used subsequently for several cycles of lead removal making it cost-effective. Column studies were also performed for biobeads with the help of Thomas model for examining its suitability for industrial application. Maximum specific lead uptake of the biobeads when applied in the column was found to be 58.26mg/gm which being promising makes it suitable for application in industries involved in the treatment of wastewater contaminated with high amounts of lead. The high mass transfer co-efficient indicate that small sized column can be used effectively to remove high amounts of lead which makes the bioremediation process by the biobeads more economical and advantageous for industrial application. Several factors like effectiveness of the biobeads in Pbremoval at both neutral and alkaline pH, reusability, high mass transfer co-efficient, regenerability and high binding capacity makes it a novel versatile, cost-effective and high utility bioremediator.
Reference Key
mukherjee2020remarkablyecotoxicology Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Mukherjee, Avishek;Sarkar, Soumyadev;Parvin, Rubia;Bera, Debbethi;Roy, Uttariya;Gachhui, Ratan;
Journal Ecotoxicology and environmental safety
Year 2020
DOI
S0147-6513(20)30278-5
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.