Enhanced economic feasibility of excess sludge treatment: acid fermentation with biogas production
Clicks: 233
ID: 260821
2019
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Steady Performance
81.6
/100
233 views
186 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
The excess sludge (ES) generated from wastewater treatment plants entails high expenditure for its treatment and disposal. In this study, firstly, the influence of mild-thermal (70 and 90 °C) and alkali-(pH 10 and 11) pretreatment methods on solubilization and acid generation from ES was investigated. The experimental results showed that the solubilization (SCOD/TCOD) increased as pretreatment intensity increased (70 °C < 90 °C < pH 10 < pH 11). However, organic acids generation was not consistent with the increased solubilization (pH 11 < 70 °C < 90 °C < pH 10). As a result of microbial analysis through next generation sequencing (NGS), it was observed that microbial community structure was greatly varied depending on the pretreatment methods. Bacteroidetes (70.8%), and Firmicutes (58.1%) were found to be dominant at thermal conditions of 90 °C and pH 10. Furthermore, the solid residue after acids generation was subjected to anaerobic digestion (AD) for CH4 production. The economic assessment showed that the thermal pretreatment at 90 °C followed by acid recovery and AD process enhanced the net profit of the treatment process with a positive gain of 2.53 USD/ton of sludge. Meanwhile, the alkali-pretreatment at pH 11 showed a negative value of − 2.0 USD/ton of sludge.Reference Key |
lee2019bmcenhanced
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
---|---|
Authors | Mo-Kwon Lee;Yeo-Myeong Yun;Dong-Hoon Kim;Mo-Kwon Lee;Yeo-Myeong Yun;Dong-Hoon Kim; |
Journal | bmc energy |
Year | 2019 |
DOI | doi:10.1186/s42500-019-0001-x |
URL | |
Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.