SnO -in-Polymer Matrix for High-Efficiency Perovskite Solar Cells with Improved Reproducibility and Stability.

Understanding interfacial loss and the ways to improving interfacial property is critical to fabricate highly efficient and reproducible perovskite solar cells (PSCs). In SnO -based PSCs, nonradiative recombination sites at the SnO -perovskite interface lead to a large potential loss and performance variation in the resulting photovoltaic devices. Here, a novel SnO -in-polymer matrix (i.e., polyethylene glycol) is devised as the electron transporting layer to improve the film quality of the SnO electron transporting layer. The SnO -in-polymer matrix is fabricated through spin-coating a polymer-incorporated SnO colloidal ink. The polymer is uniformly dispersed in SnO colloidal ink and promotes the nanoparticle disaggregation in the ink. Owing to polymer incorporation, the compactness and wetting property of SnO layer is significantly ameliorated. Finally, photovoltaic devices based on Cs FA MA PbI Br perovskite sandwiched between SnO and Spiro-OMeTAD layer are fabricated. Compared with the averaging power conversion efficiency of 16.2% with 1.2% deviation for control devices, the optimized devices exhibit an improved averaging efficiency of 19.5% with 0.25% deviation. The conception of polymer incorporation in the electron transporting layer paves a way to further increase the performance of planar perovskite solar cells.