Compósitos de Borracha Natural com Compostos Condutivos à Base de Negro de Fumo e Polímero Condutor Natural Rubber Composites with Conductive Compounds based on Carbon Black and Conducting Polymers
Clicks: 312
ID: 54220
2001
Neste trabalho foram desenvolvidos compósitos condutores elétricos de borracha natural contendo negro de fumo e compostos condutivos baseados em polímeros condutores (Eenomer®). Os compósitos foram processados a quente num reômetro de torque HAAKE e moldados por prensagem. Foram obtidas placas homogêneas, flexíveis e com ótimo acabamento superficial. Os compósitos foram analisados pelas medidas de torque no processamento, medidas de condutividade elétrica, análise termogravimétrica (TGA), calorimetria diferencial de varredura (DSC) e ensaios de tração. Estes compósitos apresentaram valores de condutividade elétrica entre 10-7 a 10-1 S/cm, dependendo do tipo de negro de fumo ou composto condutivo utilizado e da quantidade destes no compósito. A análise térmica demonstrou que os compósitos são termicamente estáveis até cerca de 300°C. Os compostos condutivos atuam como reforço para a borracha natural melhorando suas propriedades mecânicas sem perder significativamente sua flexibilidade.
In this work, electrically conducting composites of natural rubber with carbon black and natural rubber with conductive compounds containing electrically conducting polymers (Eenomer®) were developed. The composites were processed in a torque reometer HAAKE and then hot pressed. Homogeneous and flexible plates were obtained with excellent surface finish. The composites were analysed by the torque measurement during processing, electrical conductivity, thermogravimetric analysis (TGA), differential scanning calorimetric (DSC) and mechanical analysis. Conductivity in the order of 10-7 to 10-1 S/cm were achieved, depending on the type of carbon black or conductive compound used and their content in the composite. Thermal analysis demonstrated that the compounds are thermally stable until 300°C. The conductive compounds act as reinforcements in the natural rubber matrix, improving its mechanical properties without significant loss on its flexibility.
In this work, electrically conducting composites of natural rubber with carbon black and natural rubber with conductive compounds containing electrically conducting polymers (Eenomer®) were developed. The composites were processed in a torque reometer HAAKE and then hot pressed. Homogeneous and flexible plates were obtained with excellent surface finish. The composites were analysed by the torque measurement during processing, electrical conductivity, thermogravimetric analysis (TGA), differential scanning calorimetric (DSC) and mechanical analysis. Conductivity in the order of 10-7 to 10-1 S/cm were achieved, depending on the type of carbon black or conductive compound used and their content in the composite. Thermal analysis demonstrated that the compounds are thermally stable until 300°C. The conductive compounds act as reinforcements in the natural rubber matrix, improving its mechanical properties without significant loss on its flexibility.
| Reference Key |
santos2001compositospolmeros
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Santos, Marinalva A. dos;Mattoso, Luiz H.C.;Defácio, Regiani;Avlyanov, Jamshid; |
| Journal | polímeros |
| Year | 2001 |
| DOI | DOI not found |
| URL | |
| Keywords |
microscopy
Pharmacy and materia medica
Materials of engineering and construction. Mechanics of materials
Chemical technology
Engineering (General). Civil engineering (General)
Technology
Electrical engineering. Electronics. Nuclear engineering
Descriptive and experimental mechanics
Science (General)
physics
social sciences (general)
orthopedic surgery
analytical chemistry
|
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.