Real time modeling and control of a wind farm connected to a multi-bus network under faulty conditions.
Clicks: 245
ID: 53707
2019
This paper describes the detailed modeling and simulation of an aerogenerators system based on DFIG using RT-LAB simulator. A stator flux oriented vector is applied to decouple the control of active and reactive powers generated by the DFIG, and other controllers are needed to keep the DC-link voltage and grid currents at desired values. In order to adjust appropriately the pitch angle and keep the wind power at rated value, a pitch control and MPPT are involved. The model of the studied was developed first in the MATLAB, then, it was rebuilt on RT-LAB to test its performance. Simulation results validate the capability of the platform to achieve rapid simulation of complex power systems. At the end, the details of the simulation results are presented, discussed, and concluded.
| Reference Key |
benaama2019realisa
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Benaama, Kamel;Khiat, Mounir;Barkat, Said; |
| Journal | ISA transactions |
| Year | 2019 |
| DOI | S0019-0578(19)30131-4 |
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.