Preparation and properties of sputter‐deposited crystalline ultrafine particles

Clicks: 192
ID: 271939
1988
Article Quality & Performance Metrics
Overall Quality Improving Quality
0.0 /100
Combines engagement data with AI-assessed academic quality
AI Quality Assessment
Not analyzed
Abstract
The composition and size dependence of the magnetic properties of crystalline Fe‐Co and Niultrafine particles has been investigated. Samples were prepared by sputter deposition onto sputter‐etched polyimide substrates. Little difference between the magnetic properties of crystalline and amorphous particles was found in Fe‐rich alloys, but we found a greater influence of magnetocrystalline anisotropy in Co‐rich alloys. When the particles are larger than 2500 Å, the samples have negative anisotropyK u (easy direction parallel to the substrate plane). As the particle diameter decreases, K u becomes positive, and the coercive fieldH c increases from a few hundred oersteds to a maximum of more than 1000 Oe. Below a particle diameter of about 1000 Å, M s , K u , and H c all drop rapidly toward zero, presumably due to the appearance of superparamagnetism.Annealing above about 200 °C leads to significant increases in H c , K u , and M s , and also to significant changes in the line shapes of the x‐ray diffraction patterns, as a result of stress relaxation. A low‐temperature diffusion process leading to changes in the morphology of the subparticles may also be a cause of the increment of magnetic properties on annealing.
Reference Key
masumoto1988journalpreparation Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors S. Ohnuma,A. Kunimoto,T. Masumoto;S. Ohnuma;A. Kunimoto;T. Masumoto;
Journal journal of applied physics
Year 1988
DOI 10.1063/1.340218
URL
https://sciprofiles.com/publication/view/bab8408b8a27e35b8def08c9aaff3507
Keywords
Chemical composition particle size iron nickel ultrafine particle granular material magnetic properties stress relaxation diffusion process

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.