Optimization of Process Parameters in CFRP Machining with Diamond Abrasive Cutters
Clicks: 126
ID: 269040
2011
The present paper proposes a methodology to optimize process parameters for trimming applications with diamond abrasive cutters. This methodology is based on the study of quality of trimmed surface, through material integrity and surface roughness, and on the study of cutting mechanisms. Their evolutions according to tool parameters and cutting conditions have been analysed. Results show that diamond grits size must be chosen according to the required surface roughness. Feedrate must respect cutting limitations due to CFRP removal mechanisms with abrasive cutters, which have been identify through analyses of specific cutting energy. Finally, a protocol in two steps is proposed to determine the optimum process parameters according to the application. Firstly, constraint functions due to respect of quality and to limiting cutting phenomena are defined. Thus, limiting values of process parameters are determined. Then, process parameters are selected in order to optimize productivity.
| Reference Key |
aude2011advancedoptimization
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Boudelier, Aude;Ritou, Mathieu;Garnier, Sebastien;Furet, Benoît; |
| Journal | advanced materials research |
| Year | 2011 |
| DOI | DOI not found |
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.