sifat anatomi dan sifat fisika kayu mindi (melia azedarach linn) dari hutan rakyat di yogyakarta
Clicks: 179
ID: 247982
2013
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Emerging Content
0.6
/100
2 views
2 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
Anatomical and Physical Properties of Mindi Wood (Melia azedarach Linn) from Community Forest in Yogyakarta Information about mindi wood characteristics is very limited while utilisation of this wood on our society is very extensive. Better knowledge on anatomical and physical wood properties of mindi wood optimizes its utilization. Therefore, this study aims to identify anatomical (macroscopic and microscopic) and physical (moisture content, specific gravity and dimensional changes) wood properties of mindi taken from community forests around Yogyakarta. The macroscopic structural characteristics results showed that annual ring appeared clearly at transversal surface, having single vessel, vasicentric and diffuse parenchyma, rough texture, straight fiber direction, and no resin canal. Cell proportion of wood showed that fibers occupy more than 44%, followed by vessel (20%), parenchyma (19%) and rays (15%). Wood fiber dimension showed fiber length of 0.83 mm, fiber diameter of 14.57µ, and cell wall thickness of 2.50µ. Physical wood properties showed that mindi has 31% moisture content and 0.416 of basic specific gravity. Wood shrinkage from green to kilndry on longitudinal was 3.94 %, tangensial 5.74 %, and radial 2.60 %, with T/R ratio 2.38. Based on T/R ratio value, mindi wood is not recommended for wood construction due to its low dimensional stability. Furthermore, mindi wood also has high longitudinal wood shrinkage and low specific gravity indicating juvenility.Reference Key |
praptoyo2013jurnalsifat
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
---|---|
Authors | ;Harry Praptoyo |
Journal | applied sciences (switzerland) |
Year | 2013 |
DOI | 10.22146/jik.1558 |
URL | |
Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.