first eiscat measurement of electron-gas temperature in the artificially heated d-region ionosphere
Clicks: 83
ID: 208407
2000
Article Quality & Performance Metrics
Overall Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
0.0
/100
0 views
0 readers
AI Quality Assessment
Not analyzed
The ionospheric electron gas can be heated
artificially by a powerful radio wave. According to our modeling, the maximum
effect of this heating occurs in the D-region where the electron temperature can
increase by a factor of ten. Ionospheric plasma parameters such as Ne, Te
and Ti are measured by EISCAT incoherent scatter radar on a
routine basis. However, in the D-region the incoherent scatter echo is very weak
because of the low electron density. Moreover, the incoherent scatter spectrum
from the D-region is of Lorentzian shape which gives less information than the
spectrum from the E- and F-regions. These make EISCAT measurements in the
D-region difficult. A combined EISCAT VHF-radar and heating experiment was
carried out in November 1998 with the aim to measure the electron temperature
increase due to heating. In the experiment the heater was switched on/off at 5
minute intervals and the integration time of the radar was chosen synchronously
with the heating cycle. A systematic difference in the measured autocorrelation
functions was found between heated and unheated periods.
Key words: Ionosphere (active experiments; plasma temperature and density; wave propagation)
Key words: Ionosphere (active experiments; plasma temperature and density; wave propagation)
Reference Key |
kero2000annalesfirst
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
---|---|
Authors | ;A. Kero;T. Bösinger;P. Pollari;E. Turunen;M. Rietveld |
Journal | journal of food measurement and characterization |
Year | 2000 |
DOI | 10.1007/s00585-000-1210-8 |
URL | |
Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.