electrochemical removal of copper ions from dilute solutions using packed bed electrode. part І

Clicks: 226
ID: 204621
2013
Removal of some hazardous waste like copper from effluent streams has an industrial importance. In this field, this paper is directed towards electrochemical removal of copper ions from sulfate solution using packed bed electrode. The cathode packing is in static mode, consisted of graphite particles, with mean particle size equal to 0.125 cm. The high surface area of this cell is expected to give high current efficiency and removal percent. The effect of current density and liquid flow rate were tested. Experimental results obtained indicate that the efficiencies are in direct proportional with current density while inversely proportional with liquid flow rate. It was observed that, using this cell was effective in reducing copper concentration to less than 4 mg/l with R.E of 96.2% during 30 min electrolysis time.
Reference Key
khattab2013egyptianelectrochemical Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;I.A. Khattab;M.F. Shaffei;N.A. Shaaban;H.S. Hussein;S.S. Abd El-Rehim
Journal 9th international conference on intelligent systems 2018: theory, research and innovation in applications, is 2018 - proceedings
Year 2013
DOI 10.1016/j.ejpe.2012.09.011
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.