sample size effect of magnetomechanical response for magnetic elastomers by using permanent magnets
Clicks: 152
ID: 199019
2017
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Emerging Content
0.3
/100
1 views
1 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
The size effect of magnetomechanical response of chemically cross-linked disk shaped magnetic elastomers placed on a permanent magnet has been investigated by unidirectional compression tests. A cylindrical permanent magnet with a size of 35 mm in diameter and 15 mm in height was used to create the magnetic field. The magnetic field strength was approximately 420 mT at the center of the upper surface of the magnet. The diameter of the magnetoelastic polymer disks was varied from 14 mm to 35 mm, whereas the height was kept constant (5 mm) in the undeformed state. We have studied the influence of the disk diameter on the stress-strain behavior of the magnetoelastic in the presence and in the lack of magnetic field. It was found that the smallest magnetic elastomer with 14 mm diameter did not exhibit measurable magnetomechanical response due to magnetic field. On the opposite, the magnetic elastomers with diameters larger than 30 mm contracted in the direction parallel to the mechanical stress and largely elongated in the perpendicular direction. An explanation is put forward to interpret this size-dependent behavior by taking into account the nonuniform field distribution of magnetic field produced by the permanent magnet.Reference Key |
oguro2017journalsample
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
---|---|
Authors | ;Tsubasa Oguro;Shuhei Sasaki;Yuri Tsujiei;Mika Kawai;Tetsu Mitsumata;Tatsuo Kaneko;Miklós Zrínyi |
Journal | reproductive biology and endocrinology : rb&e |
Year | 2017 |
DOI | 10.1155/2017/8605413 |
URL | |
Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.