h₂s interference on co₂ isotopic measurements using a picarro g1101-i cavity ring-down spectrometer

Cavity ring-down spectrometers (CRDSs) have the capacity to make isotopic measurements of CO₂ where concentrations range from atmospheric (~ 400 ppm) to 6000 ppm. Following field trials, it has come to light that the spectrographic lines used for CO₂ have an interference with elevated (higher than ambient) amounts of hydrogen sulfide (H₂S), which causes significant depletions in the δ¹³C measurement by the CRDSs. In order to deploy this instrument in environments with elevated H₂S concentrations (i.e., active volcanoes), we require a robust method for eliminating this interference. Controlled experiments using a Picarro G1101-i optical spectrometer were done to characterize the H₂S interference at varying CO₂ and H₂S concentrations. The addition of H₂S to a CO₂ standard gas reveals an increase in the ¹²CO₂ concentration and a more significant decrease in the ¹³CO₂ concentration, resulting in a depleted δ¹³C value. Reacting gas samples containing H₂S with copper prior to analysis can eliminate this effect. Models post-dating the G1101-i carbon isotope analyzer have maintained the same spectral lines for CO₂ and are likely to have a similar H₂S response at elevated H₂S concentrations. It is important for future work with CRDS, particularly in volcanic regions where H₂S is abundant, to be aware of the H₂S interference on the CO₂ spectroscopic lines and to remove all H₂S prior to analysis. We suggest employing a scrub composed of copper to remove H₂S from all gas samples that have concentrations in excess of 1 ppb.