Research on deformation characteristics of JCOE forming in large diameter welding pipe
Clicks: 268
ID: 117864
2016
In the present work, the JCOE forming is investigated using the finite element (FE) method. A two-dimensional FE model is established for the plane strain condition by FE code ABAQUS, and the FE model is validated by experiments. The aim of this research is to investigate forming quality states in the JCOE forming process; in particular, the effects of technological parameters on forming quality are evaluated. Taking the JCOE forming process of X80 steel Φ1 219 mm × 22 mm × 12 000 mm welding pipe for instance, the deformation characteristics of JCOE forming are analyzed, in which the geometry of the formed pipe, residual stress distributions and effects of process parameters on JCOE forming quality can be obtained. Thus, the presented results of this research provide an effective approach to improve welding pipe forming quality.
| Reference Key |
fan2016advancesresearch
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Li-Feng Fan;Jia-Xin Yan;Ying Gao;Jian-Bin Yun;Li-Feng Fan;Jia-Xin Yan;Ying Gao;Jian-Bin Yun; |
| Journal | advances in manufacturing |
| Year | 2016 |
| DOI | doi:10.1007/s40436-016-0154-5 |
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.